Working On Updates 100 Complete Stuck

A common problem that users encounter is Working on updates 100 complete stuck. Several factors may be to blame for this issue, including corruption, virus, interference from another software, or even a modification in hardware.

Despite how aggravating it is, know that you are not alone in experiencing this problem. The various solutions to this problem are discussed in this article.

How to Solve Windows on Update Stuck at 100?

A number of Windows 10 users have reported success after using the following troubleshooting techniques. It is not necessary to attempt them all. You can go down the page one item at a time until you discover the one that works for you.

Allow for The Operation to Conclude

Installation of some Windows updates could take longer than usual. If progress has paused on an update, and not in the middle of a series of activities, that’s where you should focus your debugging efforts.

Waiting for it to finish on its own is the most effective method. If you can wait at least three to four hours for the update to finish before attempting any troubleshooting steps. A few people waited till the next morning to log into their computers after leaving them to install the upgrades.

If you’d rather not wait that long, which we totally get, then feel free to use the alternatives we’ve laid out below.

Take Out Any USB Devices and Reboot Your Computer

Unplug all USB devices from your computer before continuing. Having supplementary external devices attached can cause problems like the one at hand because your computer will interpret this as a modification to the default hardware configuration.

Give it a few minutes after taking off all extraneous components to see if that helps. If it fails, you may always consider rebooting the computer in safe mode. Nevertheless, this approach requires you to take the battery off your laptop, so you should only do it if you are comfortable with such a task.

Follow these steps to restart your computer in an emergency:

  • If you want to turn off your computer, hit and hold the power switch for a few seconds.
  • Take out the battery and power cord once it has shut down.
  • Wait a few minutes, and then put it back in.
  • Check if the problem persists after a PC restart.

Run Windows Update Service Again

Downloading, installing, and removing updates are all taken care of by Windows Update. When upgrading your OS or its programs, you may run into problems if this service is stopped or not functioning properly.

If turning the computer off and back on doesn’t fix the issue, running the Windows Update service might. The following steps will guarantee that the update service is functioning correctly:

  • To launch Run, press the Windows key plus R.
  • Next, press the Enter key after typing services.msc into Run.
  • Locate the Windows Update service and then right-click on it within the new window that appears.
  • Just right-click and select Properties.
Properties

Just hit the Stop option in the Properties window.

Properties window

You should pause for a second or two before pressing the Start button again. In the Startup type menu that appears, select Automatic.

 Automatic

If you want to keep the modifications, select Apply, and afterward OK.

Search for Virus

A virus or file corruption may be stopping you from updating your OS.

If you’re worried that this might be the case, a full system scan with your antivirus software is a good place to start looking for problems. Using the CMD (Comand Prompt), you may initiate system-integrated repair tools like SFC, DISM, or CHKDSK if you do not have access to a third-party security suite.

To get around this, you’ll need to boot into Repair Mode if you’re having trouble with even the most fundamental Windows features and programs. When you’re in Repair Mode, click Troubleshoot, after which Advanced. The scans can then be executed by selecting Command Prompt from the available menu options.

Command Prompt

If any problems are discovered, these tools will attempt to fix them automatically. To confirm if the error has been rectified, recheck after the scans.

Launch Windows Update Troubleshooter

Performing the Windows Update troubleshooter has also been helpful to users in fixing the issue. Microsoft included this handy tool in Windows to help address any problems that may arise as a result of installing the latest upgrades.

It can be operated as follows:

  • Windows Settings may be accessed by pressing Win + I.
  • Select Troubleshoot from the menu bar, then select Other Troubleshooters in the right edge of the screen.
Windows Update Troubleshooter
  • Locate Windows Update troubleshooter in the subsequent window and select the Run option next to it.
Windows Update troubleshooter

Afterwards the troubleshooter will start looking for problems in the system. When problems are discovered, solutions will be suggested. If so, then please use the Apply this fix button. If not, then it’s time to hit the Troubleshoot button and try one of the methods down below.

Initiate the Safe Mode Boot Process

When you boot into Safe Mode, Windows is loaded with a minimal set of drivers and applications. Users can check to see if a problematic process is running in the background by switching to troubleshooting mode.

To do this, we’ll first restart the computer in Safe Mode by utilizing Repair Mode, and then we’ll do a regular restart. Ideally, this will solve the current issue.

To sum up, here is what must be done:

  • Simply keep pressing F11 when on the Configuration screen for Windows to bring up the Advanced Startup menu.
  • To access the Advanced settings, select Troubleshoot from the main menu. After getting there, select the Startup settings tab.
Startup settings
  • Next, in the pop-up screen that displays, choose the Restart option.
Restart option
  • If you want to continue, use the F5 button on your keyboard. By doing so, Safe Mode will begin effectively. Normal PC restarts must be performed in Safe Mode.
restart

When you restart, you shouldn’t see the problem again. Now that the updates have been installed, you can verify their efficacy.

Carry out a Clean Boot

Clean Booting allows you to launch Windows with the bare minimum of drivers and startup apps, which can assist prevent software incompatibilities while applying Windows updates. To successfully execute a clean boot, you must:

Hit the Windows key plus R to open the Run dialog box, then type msconfig & hit Enter. Then click the page labeled “Services.” Mark the box labeled “Hide All Microsoft Services.”

Hide All Microsoft Services

To finish, select “Disable all” and then “Apply” to commit the new settings. Pick Open Task Manager from the Startup menu.

Choose the first running program in the Task Manager window, then click the button labeled “Disable.” Next, you must individually shut down each program that is currently running. When you’re finished, hit OK to exit Task Manager.

After that, you can restart the device and attempt to upgrade Windows once more. If the “working on updates” issue does not appear after a clean boot, then one of your apps is likely to blame.

Remove the Affected Update

If the problem persists after deleting the update, try reinstalling it. The procedure entails the following steps:

  • Navigate to the Control Panel. To access the features and programs, select the corresponding tab.
  • Select View installed updates from the list on the left.
Remove the Affected Update

Choose “Uninstall” from the menu that emerges when you right-click the problematic update. TheWindows update is stuck at 100error should disappear after a system restart.

Go for Automatic Repair

If none of those options work, try restoring your system using WinRE. In order to use this procedure, you must first construct a restore point. Instructions on how to achieve it follow.

  • It’s time to bring out WinRE.
  • When prompted, select Troubleshoot from the drop-down list, followed by Advanced.
  • System Restore can be found under “Advanced” in the settings menu.
Go for Automatic Repair

To finish the restore, just stick to the on-screen prompts. The problem should now be resolved upon attempting to perform Windows Update.

FAQs

How do I fix working on feature 100 complete?

System restore is one of the possible solutions to the problem. This can be accomplished by holding down SHIFT when you restart the computer. At the beginning of the boot process, you will be presented with the Advanced Startup submenu. Tap on Troubleshoot. Pick System Restore from the list of available Advanced Options. Choose an earlier save point before the upgrade, and then hit the Restore button.

Why My laptop is stuck working on updates?

Even the greatest Windows laptops can occasionally suffer troubles with software conflicts or prior challenges that lead the screen to halt, and this might result in a stalled update.

What happens if Windows 11 update is stuck at 99%?

It’s possible that you could lose data if your Windows 11 installation gets stopped at the 99% mark. It is highly advised that you do frequent backups of your system in order to prevent this issue, or any other faults that may cause data loss, from occurring again.

How do I fix a stuck working update?

Verify that the updates genuinely are stuck before performing any of the preceding to fix a stuck update in operation.

  • Restart the device by switching it off and then back on.
  • Be sure you’re using the Windows Update tool.
  • Launch the Microsoft Diagnostics and Repair Tool.
  • Proceed to Safe Mode in Windows.
  • Using System Restore, you can undo your recent actions.
  • The Windows Update cache should be deleted manually.
  • Start a full virus check.

Last Words

Working on Updates 100 complete stuck can be incredibly frustrating when you need to send an urgent email or finish a crucial task.

Countless people have had this difficulty and discovered solutions that work for them. One of the solutions presented here should get Windows Update unstuck for you.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Share via
Copy link
Powered by Social Snap