How To Start HP Laptop In Safe Mode Windows 10

If you’re experiencing problems with your computer and need to troubleshoot the problem, you may be able to solve it if you boot into Windows 10 Safe Mode. Safe Mode loads only the minimum number of drivers and services for a working Windows system and helps reduce system conflicts that may have caused a stop error or other serious issues.

Safe mode is a diagnostic mode in your Windows 10 operating system, which either loads only the drivers needed for Windows to load or doesn’t load any third-party drivers at all.

How to start HP laptop in safe mode on Windows 10

Safe Mode is considered a last resort for troubleshooting problems on your PC when fixes and tweaks don’t work. Here’s how to start in Safe Mode to help you try a workaround.

Unlike Normal Mode, Safe Mode does not load third-party drivers. To start Windows 10 in Safe Mode,

  1. Use the keyboard shortcut Windows key + R and
  2. Enter msconfig.exe and then
  3. Press Enter or click OK on the action box that appears on your screen.
  4. In the System Configuration window, choose “Safe Boot” from the drop-down menu.

Restarting your computer will bring up Safe Mode.

Getting your PC to boot in Normal Mode isn’t possible. Here’s what you need to do.

  1. Make sure that the PC is powered on Press the Power button
  2. Keep pressing it for 8 seconds until the computer shuts down.
  3. Safe Mode with Networking will be enabled when you do this.
  4. Safe Mode with Networking must be selected with the arrow keys on your keyboard when the computer loads to the Advanced Boot Options.
  5. Press Enter.

HP Safe Mode F8 Not Working Windows 10

HP Safe Mode F8 Not Working Windows 10
  1. Press the F8 key continuously until the Advanced Boot Options menu appears.
  2. Press Enter after selecting Safe Mode with Networking.
  3. Press Enter again.
  4. Once your computer loads in Safe Mode, use the keyboard shortcut Windows key + R to open the Run dialog box.
  5. In the Run dialog box, type msconfig.exe
  6. Press Enter.

There will be a System Configuration window that pops up upon starting up in Safe Mode with Networking.

Choose the Boot tab at the bottom of this window and ensure that “Safe boot” is set to “on”. Press OK.

Restart your computer to activate the changes. When you try to start the PC in Normal Mode, you should no longer experience issues.

In some cases, this will not work and your Windows 10 operating system might get stuck in Safe Mode with Networking. To get back into Windows 10, press the HELP key. Getting back into normal mode requires pressing F7 and then entering.

How to Start HP Laptop In Safe Mode Windows 11

  1. To start Windows 11 in Safe Mode,
  2. Use the keyboard shortcut Windows key + R
  3. Enter msconfig.exe
  4. Press Enter or click OK on the action box that appears on your screen.
  5. Choose “Safe Boot” from the boot tab’s drop-down menus.
  6. Restarting your computer will start Windows 11 in Safe Mode.

These steps can be followed if your computer cannot boot into Normal Mode.

The computer needs to be shut down. As a result, Safe Mode with Networking will be launched on Windows.

When the computer loads into the Advanced Boot Options, the arrow keys on your keyboard must be pressed to select Safe Mode with Networking. Press Enter key.

Hp Laptop Won’t Start In Safe Mode

If your computer won’t start in safe mode and you want to reset it, but you can’t find the usual options, here’s how to do it.

  1. Choose the Windows button, then
  2. Select Power.
  3. Click the More power options.
  4. Select Restart and
  5. Tap or click on Troubleshoot > Advanced options > Startup Settings.
  6. Choose Safe Mode and Restart.

Now Windows 10 will start in Safe Mode.

To get back to Normal mode, follow the same steps again but choose appropriate options under Startup Settings > Normal startup.

Hp Laptop Stuck in Safe Mode With Networking

If you are unable to start your computer in Safe Mode on Windows 10, then it might be possible that your PC is missing the required DLL file. Click to the Control Panel and open the Add/Remove programs utility.

Select Windows 10 > Uninstall from the menu.

Note: If you’re using a business version of Windows 10, then you may have a slightly different interface.

  1. Select “Show more details”
  2. Click Next to uninstall Office.
  3. Uninstall any other unwanted applications on your PC.
  4. Restart when the uninstall is done.
  5. Press and hold the “F10” key of the keyboard.
  6. Select Safe Mode with Networking
  7. Tap Enter.

Note: You can uninstall applications one at a time by clicking on them, or you can select multiple applications and right-click to select Uninstall.

Hp Laptop Unable to Print In Safe Mode With Network Connection

If your computer is starting into Safe Mode with Networking but you are unable to connect to the Internet, then try the following:

Hp Laptop
  • Start up your computer.
  • From within the boot menu, select Safe Mode
  • Press Enter.
  • Press F10 repeatedly until you reach a menu that says Advanced Boot Options.
  • Select “Safe Mode with Networking”.
  • Press Enter.

Now you should have the access to the Internet. You can now download and install the HP software or drivers that are required to print while using your computer.

HP Laptop In Safe Mode With Network Connection

To fix this issue, try the following:

Unplug any hardware devices and peripheral media such as CDs or DVDs that are connected to your PC.

Restart your computer.

After restarting, plug in the media that you previously removed and try to start your computer usually.

If you are still unable to get started normally, then you might have a faulty hardware component, such as a faulty memory or hard drive. In this case, your PC needs to be restored from its recovery partition and further troubleshooting performed.

HP Laptop In Safe Mode With No Network Connection

If you are unable to start your computer in Safe Mode with Networking, then it might be because your computer is missing a required driver file. To fix this issue,

start the PC in Safe Mode with Networking.

  • Turn on the computer. Immediately,
  • Press and hold the “F8” key on your keyboard until you get a list of options.
  • Select Safe Mode with Networking
  • Tap Enter.

Once you’re in Safe Mode with Networking, you should be able to connect to the Internet and uninstall any programs that are unwanted or unnecessary.

Final Word

Safe mode is an important troubleshooting tool that lets users access startup options without bogging down the operating system or another software load.

Seems to be a pretty good troubleshooting technique when you boot up your machine in safe mode, some of the Windows programs run better than before.

Moreover, there are applications that will not run properly in safe mode. This is normal and expected since some of these programs or apps require additional hardware resources that the computer hardware doesn’t have. Therefore, they will not function properly in safe mode.

Leave a Comment

Your email address will not be published.

Scroll to Top
Share via
Copy link
Powered by Social Snap