For those who want to keep their digital memories safe, the WD Easystore portable hard drive may assist. In addition to being provided with the WD Backup program, it has a universal connection. You’ll need to install the WD Backup application and set a backup time. Learn how to use WD Easystore on Windows 10 by following the instructions below.
Table of Contents
- Installation Process
- WD Drive Utility
- Solution 1. Perform a Hard Drive Examination
- Solution 2. Verify Hard Drive Connectivity
- Solution 3. Remove WD Drive Utilities and Install Them Again
- Solution 4. Configure BIOS to Recognize USB Device
Unfold the WD Easystore HDD packaging. The WD Easystore portable storage drive, a USB 3.0 connector, and quick-start instructions are included in your box. Prepare to set up Wd Easystore on Windows 10 by removing all the tapes and storing everything in their original locations.
Start the Windows 10 device. Plug your HDD and computer using the USB cord you got with your HDD. It takes a long time for your hard disk to be detected by your Windows 10 machine. Upon successful detection of the drive, a window marked Found New Hardware will appear on your display. The Cancel button may be used by pressing it.
Your WD Easystore HDD is now downloading the required driver for Windows 10. Upon completion of the driver download, you may begin to use your hard drive again. To stay up to speed on the newest hard drive news, you should activate your HDD. WD Easystore on Windows 10 may be installed using the WD Discovery application or online registration. Installing the WD Easystore HDD on a Windows 10 PC may be accomplished in this way.
WD Drive Utility
To set up, monitor, and troubleshoot your WD drives, you may use the built-in tool WD Drive Utilities. Running drive diagnostics, managing RAID setup, and formatting the drive may all be done utilizing the WD Drive Utilities. Checking the temp, sound, or read/write errors may also be done using WD Drive Utilities to see if there are any indicators of a malfunctioning HDD.
As a result of utilizing WD Drive Utilities, you’re likely to see errors like WD Drive Utilities doesn’t identify the drive, connect an appropriate compatible WD drive, etc. These problems may be generated by a variety of factors, including:
- The inability to launch the WD Drive Utilities or similar WD functions.
- The WD Drive Utilities not working with WD drives.
- The firmware edition is no longer up to date.
- An incompatibility between the operating system and hardware setup.
The problem is that WD Drive Utilities doesn’t detect the drive, and we’ll teach you how to repair it in the following sections.
Solution 1. Perform a Hard Drive Examination
WD Drive Utilities can only recognize hard drives manufactured by Western Digital (WD). As a result, you must look into the hard drive’s maker to resolve this problem.
Solution 2. Verify Hard Drive Connectivity
Because of a bad connection, WD Disk Utilities may not be able to recognize the hard drive. Inspect the hard disk connections if you’re in this position. Follow up by making sure you no longer have the problem with your WD Drive Utilities failing to recognize a drive.
Solution 3. Remove WD Drive Utilities and Install Them Again
You may consider uninstalling and reinstalling WD Drive Utilities to address the issue of not identifying the drive. Make sure you get the secure variant from the official webpage. After that, re-run it to examine if the WD Drive Utilities problems have been resolved.
Solution 4. Configure BIOS to Recognize USB Device
Removing the USB port in the BIOS of the WD hard drive might lead it to stop operating under Windows 11/10. You may allow USB devices in the BIOS if this is the case. You may then reboot your pc to determine if the WD hard disk is accessible.
How can I assess the condition of my WD hard drive?
Answer- WD hard disk health may be examined with the CHKDSK function in Command Prompt.
What is the best way to utilize my WD HDD?
Answer- Connecting a WD portable hard drive to a desktop gives you accessibility to its contents. Then use File Explorer to get at it.
Why isn’t my WD Elements software working anymore?
Answer- Ensure the storage has a drive label allocated before proceeding. Look in the disk management section to verify whether your drive is listed. If it appears yet no drive letter is shown, be sure to provide one. Furthermore, instead of utilizing a USB hub, attach the drive directly to a USB socket on the device’s back.
Your favorite photos, movies, and other critical documents and applications should be backed up since you may need them at any moment, especially if you have a lot of them. As a result, this tutorial on how to use WD Easystore on Windows 10 and other concerns that may arise with this portable drive has been provided to you.