If you have a Samsung soundbar, you may be wondering how to control Samsung soundbar without remote. Luckily, there are a few ways to do this
You may have noticed that after disabling your laptop’s speakers, the headphones aren’t very loud. Finding an alternative way of controlling your soundbar audio output can be challenging, but it doesn’t have to be!
In this blog post, we’ll explain everything you need to know about controlling a Samsung soundbar without a remote so that you can get back up and running in no time. There are a few troubleshooting tips that might be able to help. And finally, if you want to get the most out of your soundbar, check out some of our favorite tips and tricks.
How To Control Samsung Soundbar Without Remote
If you don’t have the Samsung Soundbar remote or it is not working, you can still control your soundbar using any universal remote.
You can easily connect a universal remote to your Samsung Soundbar by accessing the settings menu on your soundbar. If you’re wondering how to control your Samsung soundbar without a remote, don’t worry – there are several ways to do it.
Here are step-by-step solutions that will help you operate your soundbar:
- Option 1 – Use the Buttons on the Soundbar:
If your Samsung Soundbar has onboard buttons, then this is probably the easiest way for you to control it without needing a remote.
Simply press and hold down either of these two buttons simultaneously until a special LED light appears on the unit itself — depending on the model of your specific Samsung Sound Bar, these buttons could be labeled as “Mode” or “Source.”
Then use either one of those two buttons again (the same ones) to cycle through all of the different functions that are available on your soundbar like volume, bass, treble, etc.
And if you want to increase or decrease any given setting then just press and hold down either button until you get it where you want it.
- Option 2 – Use Your TV Or Cable Remote Controls:
Another option if none of these are available would be: Adding a universal IR learning remote that receives signals from any regular physical infrared Ray. Which will allow you to program existing remotes for use on all sorts of electronics including TVs and soundbars.
You’ll need a direct line of sight between the infrared receiver eye in question. However, make sure that when setting up everything physically nothing is obstructing any potential signals from passing by. Before going any further with this solution otherwise, all efforts might end up being moot due to weak signal strength.
- Option 3 – Use Samsung’s SmartThings apps:
You may also want to consider buying a dedicated app for controlling proper brand-specific components like Samsung SmartThings App.
Not only can certain soundbars be controlled via an app, some even come with a voice assistant or Chromecast included! This makes it easier than ever to control your music and media experiences in the comfort of your own home.
With one simple yet smart application, or even with just your voice, you have the power to select your favorite music while controlling its volume and streaming service.
Lastly, there are various voice assistants like Alexa, Google Assistant, IFTTT, etc which let users turn ON/OFF their smart home electronics including sound bars & even adjust their settings through voice commands making it, even more, easier than remotes.
How To Connect Samsung Soundbar To TV
- Place your soundbar close to the TV and plug it into a power outlet.
- Connect an audio cable (usually an optical cable) from the TV’s AUDIO OUT port to the soundbar’s INPUT port.
- Turn on your television and soundbar.
- Change the TV’s audio output setting to external speakers or a soundbar, depending on your model television.
- If you are using a Samsung soundbar, use your TV remote to access the Sound Output menu and select “External Speaker.”
- Adjust the volume level on both your soundbar and TV to ensure that you’re getting the best possible sound from the system.
How To Troubleshoot Samsung Soundbar Problems
If your Samsung soundbar is not working properly, then it could be due to any number of reasons. Here are some tips you can use to troubleshoot common Samsung soundbar problems:
- Check all your connections:
Make sure that all the cables and wires connected to the soundbar are in their proper places and securely connected. Also double-check that the power cord is properly plugged into an outlet and that the soundbar is turned on.
- Check audio settings:
If you’ve recently changed any of the volume, bass, or treble settings on the soundbar, go back through them to make sure they’re set correctly. You may also want to try adjusting these settings further to see if it improves your sound quality.
- Check for software updates:
If your Samsung soundbar isn’t working as it should, there could be an issue with outdated software or firmware on the device. Connect your device to a computer via USB and check for available updates from Samsung’s website or product support page.
- Reset the soundbar:
If all else fails, try resetting the soundbar.
Tips And Tricks For Using Your Samsung Soundbar
Having the right soundbar for your home theater setup is essential for getting the best audio experience possible. Samsung soundbars are known for their high quality, but they can be tricky to set up and use.
Here are some tips and tricks you can use to get the most out of your Samsung soundbar.
- First, make sure that you follow all of the instructions given in your user manual when setting up the soundbar.
- Next, experiment with different EQ settings or listening modes depending on what genre of media you’re playing; this will help ensure that you’re always getting the best sound quality.
- Finally, make sure that any wireless connections are secured properly to avoid interference from other wireless devices.
If you follow these simple tips, using your Samsung Soundbar will become a breeze.
Conclusion
There are a few different ways that you can control your Samsung soundbar without using the remote. You can use your TV’s remote control, your soundbar’s buttons, or Samsung’s SmartThings app.
Each of these methods is pretty easy to use, so you shouldn’t have any trouble getting your soundbar to work without the remote. If you’re having trouble with your soundbar, be sure to check out our troubleshooting tips. And if you want to get more out of your soundbar, check out our tips and tricks section for some great ideas.